Semiconductor Field Service Technician (Engineering Technician, I)

MetaOption LLC
 San Jose, CA

Semiconductor Field Service Technician (Engineering Technician, I)

Skills: Semiconductor Equipment, Field Services Technician

Experience level: Associate

Experience required: 2 Years

Education level: Associate degree

Job function: Engineering

Industry: Consumer Electronics

Relocation assistance: No

Visa : Only US citizens and Greencard holders

This position requires full-time presence at your assigned office(s)/worksite(s). Every candidate is going to have to go to San Jose, CA for training that will last from 6 to 8 weeks. Also, they will have to be flexible on work schedules as they can be 4 days onsite , 3 days remote and vice versa. There also may be over night work.


Minimum 0 - 2 years of related (electromechanical) work experience (i.e. field service engineer or technician position in a semiconductor equipment company or a technical position in the engineering field)


Lithography equipment experience


We have an exciting opportunity in San Jose, Calif to support our photolithography equipment customers and enable them to utilize cutting edge technology in their semiconductor manufacturing process. This is an entry level position where you will be trained to support lithography equipment (steppers and scanners).


Install, repair, calibrate and maintain semiconductor process equipment while minimizing equipment down time. Escalate advanced repairs as needed, to senior level technicians.

Monitor, inspect and maintain semiconductor equipment in order to prevent and minimize malfunctions.

Maintain accurate documentation of maintenance activity and provide periodic reports

Monitor stock level of service parts and equipment to ensure adequate inventory is available for repair work

Provide training and assistance to technicians and may provide basic instruction to customers.

Participate in ongoing technical training to expand technical expertise.


Associates degree or equivalent experience required, Bachelors degree preferred

Minimum 0 - 2 years of related (electromechanical) work experience (i.e. field service engineer or technician position in a semiconductor equipment company or a technical position in the engineering field). Litho experience preferred, experience on high precision equipment helpful.

May require up to 30% travel (valid drivers license and acceptable driving record necessary).

Requires MS Word, Excel, and Powerpoint.

Position may require travel to other offices/customer sites within the US. Some overseas travel as needed.

Requires ability to work flexible shifts

This position requires driving for company business as an essential function of the job and must remain in compliance with company safety guidelines and policies.

Requires ability to lift up to 30 pounds individually and for lifting over 30 pounds assistance may be available.

Substantial amount of standing, walking, typing, grasping, talking and hearing.

Substantial amount of driving required, sometime for multiple hours at a time.

Occasionally kneeling, crouching, stooping, reaching, pushing, pulling and climbing stairs or ladder.

The worker is required to have close visual acuity with or without corrective lenses for extensive reading; visual inspection involving small defects, small parts, and/or operation of machines (including inspection); using measurement devices; and/or assembly or fabrication parts at distances close to the eyes.

Working primarily in a cleanroom environment (wearing full clean room suit, facemask, gloves, safety glasses)

The work environment may include a variety of physical conditions such as proximity to moving mechanical parts, electrical current, working on scaffolding and high places, exposure to chemicals, ultraviolet light and lasers, working in enclosed spaces, close quarters, narrow aisles or passageways.

The work environment may include working in highly time sensitive situations requiring quick resolution including equipment problems.