Andersen Windows + Doors
 North Branch, MN

Job ID: 29954


Shift: Monday – Friday. 7:00am – 3:00pm.

Pay: N25 (Extruder Operator) level. $18.50 - $25.50 per hour.

Primary Responsibilities

  • Clean tools
    • 3 plates and mandrel thru Maxi Blast
    • Wipe excess material off plates and spray with 711
    • Remove 1st calibrator off manifold and clean vacuum slots (top & bottom)
    • Inspect all tooling components for damage and/or wear
    • Use flow meter to verify good water flow thru 1st calibrator and record.
    • Assemble die and spray all tooling with 711. Unless there is a EAM work order for a Die Measurement needed.
    • Inventory all tooling components and make sure everything is in the cart
  • Die measurement – EAM Work order initiated
    • Using the App for Die measuring enter in measurements for Plate #1 gap to the mandrel in the areas identified on the App.
    • Remove Plate #1 and measure Plate #2 gap against the mandrel in specified areas according to the App.
  • During the inspection portion of the tool cleaning if there are any broken/worn strips welds either create a WO in EAM for future work or repair and document in EAM that day.
  • Check all sizers for paint wear and re-paint if necessary
  • Tool based and/or Process related Work Orders generated thru EAM
    • Die modifications for Color change issues
    • QC or Operation generated Work Orders
    • Die/Calibration alignment system work
  • Generate a report of the previous run and create Work Order if needed for continuous process improvement
    • Data from QC Calc
    • Power Bi data showing latest trends of DT issues
    • Check on Lead Operators learning plan for recommendations
  • Review current Process and incorporate more robust solutions to the Process
    • Integrate permanent water placement solutions if needed and document
    • Integrate permanent air placement solutions if needed and document
    • Integrate permanent shims into downstream tooling and document in current profile drawing
  • Operational support when needed


Must currently work in North Branch.




North Branch, MN US


Andersen Corporation