Dialysis Equipment/Maintenance Technician

Dialysis Clinic Albany, GA
Overview

The Dialysis Equipment/Maintenance Technician assures equipment and supplies used in all areas of the facility are properly functioning and safe for use. The equipment technician assures the physical plant is properly maintained.

A valid driver's license and a clean driving record are required.

Responsibilities

* Inspect, operate, or test machinery or equipment to diagnose machine malfunctions.

* Record type and cost of maintenance or repair work.

* Clean or lubricate shafts, bearings, gears, or other parts of machinery.

* Repair or replace defective equipment parts, using hand tools and power tools, and reassemble equipment.

* Perform routine preventive maintenance to ensure that machines continue to run smoothly, building systems operate efficiently, or the physical condition of buildings does not deteriorate.

* Use tools ranging from common hand and power tools, such as hammers, hoists, saws, drills, and wrenches, to precision measuring instruments and electrical and electronic testing devices.

* Assemble, install, or repair wiring, electrical or electronic components, pipe systems, plumbing, machinery, or equipment.

* Diagnose mechanical problems and determine how to correct them, checking blueprints, repair manuals, or parts catalogs, as necessary.

* Dismantle devices to access and remove defective parts, using hoists, cranes, hand tools, and power tools.

* Plan and lay out repair work, using diagrams, drawings, blueprints, maintenance manuals, or schematic diagrams.

* Order parts, supplies, and equipment from catalogs and suppliers, or obtain them from storerooms.

* Adjust functional parts of devices or control instruments, using hand tools, levels, plumb bobs, or straightedges.

* Paint or repair roofs, windows, doors, floors, woodwork, plaster, drywall, or other parts of building structures.

* Operate cutting torches or welding equipment to cut or join metal parts.

* Align and balance new equipment after installation.

* Inspect used parts to determine changes in dimensional requirements, using rules, calipers, micrometers, or other measuring instruments.

* Set up and operate machine tools to repair or fabricate machine parts, jigs, fixtures, or tools.

* Estimate repair costs.

* Grind and reseat valves, using valve-grinding machines.Install equipment to improve the energy or operational efficiency of residential or commercial buildings.

* Perform routine maintenance on boilers, such as replacing burners or hoses, installing replacement parts, or reinforcing structural weaknesses to ensure optimal boiler efficiency.

* Test and treat water supply.

Qualifications

* High school diploma or general education degree (GED); or one to three months related maintenance experience and/or training.

* Must successfully complete assigned manufacturer training courses within 12 months.

* To perform this job successfully, an individual should have knowledge of Inventory software and Manufacturing software.

DCI is a federal contractor and an Equal Opportunity/Affirmative Action Employer-Veterans/Individuals with Disabilities. If you are having difficulty using the online application system or would like to request other accommodations or application methods, please contact Doug Patterson at Accommodations@dciinc.org or 615-327-3061. Once a request has been made, DCI will initiate a discussion with you about your needs and whether an accommodation can be provided. DCI is committed to providing such accommodations where possible.

For more information about equal opportunity please see:

https://www.dol.gov/ofccp/regs/compliance/posters/pdf/eeopost.pdf;

https://www.dol.gov/ofccp/regs/compliance/posters/pdf/OFCCP_EEO_Supplement_Final_JRF_QA_508c.pdf;

https://www.dol.gov/ofccp/pdf/pay-transp_formattedESQA508c.pdf; and

https://www.nlrb.gov/sites/default/files/attachments/basic-page/node-3788/employeerightsposter-8-5x11.pdf.